WANT A SNOW PUSHER THAT IS BUILT LIKE A BRICK SH** HOUSE AND NOT LIKE A PORTA POTTY, YOU HAVE COME TO THE RIGHT PLACE!!!!!
Snow Pushers are manufactured by Hydro Cutter Inc. in North Oxford, MA Servicing New England and abroad.
*Back Hoe / loader Steel Trip model :
These models have two or three independent adjustable steel trip edges depending on width of unit. They are fabricated and designed to allow for adjustment(s) do to wear. This allows the user the ability to maintain a fresh edge. Standard units are 43" tall x 45" deep x 10' to 20' wide. End plates are fabricated from 1/2" thick steel that have been extended in the rear of the unit to help with keeping the unit level during use. Standard shoes are reversible 1" x 5". Up graded shoes made of AR400 are available. Quick couplers are available.
*Back Hoe / loader rubber edge model :
The same materials and thicknesses are used in the construction of the rubber edged units as the trip models. The rubber edge is 1 1/2" thick x 10" wide, tensile strength is 2500 lb. They are slotted to allow for adjustment(s) do to wear. Quick couplers are available.
*Skid Steer steel trip Model :
This model has an universal quick coupler plate that allows the pusher to float vertically as well as horizontally. Standard model has two adjustable steel trip edges. Constructed with 5/16" plate and 1/4" walled tubing and U-Chanel. Shoes are reversible 1" thick x 4" wide.
*Skid Steer rubber edge model :
This model has an universal quick coupler welded directly on the back of the unit. Constructed with 5/16" plate and 1/4" walled tubing and U-Chanel. Shoes are reversible 1" thick x 4" wide. The slotted rubber edge is 1" thick x 8" wide having a 2500 lb tensile strength.
All units come ready to use having grade 8 hardware installed on shoes and cutting edges. Every model is welded SOLID on both sides of every seam, then sandblasted, primed and painted with a 2 part epoxy paint.
Want a quick coupler.... NO PROBLEM!!!!! Want a different color than orange to match your equipment.... NO PROBLEM!!!!
We are a complete fabrication shop having waterjet cutting capabilities. Fabricating any type of attachment (bracket you may need or want) to attach these pushers to your machine, is not a problem.
Your satisfaction is guaranteed and we stand behind our product 110% !!
Check us out on Facebook: Hydro Cutter Inc. On our web sight: www.hydro-cutter.com or CALL US TODAY 508-892-7481 cell 774-262-4125
Now accepting Visa & MasterCard , we also offer leasing of our product!!!!
** Dealer inquires welcome **
do NOT contact me with unsolicited services or offers