favorite
favorite
hide
unhide
flag

Posted

print

Onkyo TX-NR616 HDMI / Main Control Board TESTED QPWBCHDM1110A or B - $100 (Medford)

Onkyo TX-NR616 HDMI / Main Control Board TESTED  QPWBCHDM1110A or B 1 thumbnailOnkyo TX-NR616 HDMI / Main Control Board TESTED  QPWBCHDM1110A or B 2 thumbnail
condition: excellent
make / manufacturer: Onkyo
model name / number: QPWBCHDM1110A

more ads by this user

Cash only, pick up in Medford.

Also have lots of other parts from this receiver, see end of listing.

Removed from an Onkyo TX-NR616 which has a bad main amplifier board (one channel dead). But the HDMI board works perfectly fine, and is a common failure point in these units. This is a 4K HDMI board with 8 inputs (7 rear one front), 2 outputs, ethernet, and USB. It also contains all the main brains/processing for the unit, so can resolve issues other than just HDMI problems.

Pretty easy to swap out, just make sure you take anti-static precautions as these are pretty sensitive. All ports (HDMI, Ethernet, USB) have been tested (including the internal HDMI port that feeds the front panel, all ribbon cable connectors, plugs, etc). Works perfectly. Updated to the latest firmware. Includes the thermal sensor that attaches to the heatsink so you don't have to do any soldering to swap it.

Part numbers on it are QPWBCHDM1110A, BCHDM1110, and 25141110A, and should also work for QPWBCP1120B

The firmware is the same for the TX-NR616, TX-NR515, HT-RC460, HT-R791, HT-S7500, which implies this board may work in those as well but I can't guarantee that, compare the part number, ports, etc to yours. From the bit of googling I did it does look to be the same board for all.

I have the screws for it if you need some.

Also have several other components from this unit available
Remote Control (RC-837M)
Entire front panel with perfect display and all buttons work fine
Power supply/transformer
Digital and analog input boards
Speaker output board
Fan (no excess noise)
Basically everything except the main amp board and the preamp board that connects to it (though if you need parts off one of those, all but 1 or 2 channels are good on them).

post id: 7748536683

posted:

updated:

best of [?]

loading
reading
writing
saving
searching