craigslist | tools in north shore

SMALL JOB BOX

2009-12-21T20:45:04-05:00

great for the back of a pick-up truck. can be bolted down. 3ft wide x 20in high x 18in deep. good condition. $75.00

IR Compressor - 60 gallon (Marblehead) $75

2009-12-21T20:25:31-05:00

Ingersol-Rand 60 gallon compressor. Older, works well. Quiet. 110 Volt. $75

DEMOLITION HAMMER

2009-12-21T19:26:14-05:00

MAKITA - Heavy-Duty, demolition hammer, 1200 B.P.M. , ( this - one - works, ) with case. $ 700. ( 603-244-0600 ) Ma-NH-coast

Tire Changer amco 7000 (salem)

2009-12-21T19:20:08-05:00

I have a amco tire changer for sale. make me an offer works good does up to 20 in wheels. my name is dan email if interested

PROPANE HEATER

2009-12-21T19:17:23-05:00

Contractor series, Mr Heater, hi and low setting, adjustable tilt, all metal constructed, ( 75 th. BTU - to 125 th. BTU. ) with tank . $ 225. ( 603-244-0600 ) Ma-NH-coast

BRIGGS and STRATTON ENGINE

2009-12-21T19:06:27-05:00

Briggs and Stratton engine is on a 3" Homelite pump, engine works great, pump needs repair, engine can be used for other equipment or recreation vehicle. $ 150. Ma-NH-coast 603-244-0600

TABLE SAW

2009-12-21T18:56:10-05:00

Craftsman, 10 inch table saw, on a stand, with side extension, belt driven, $ 125. -603-244-0600- Ma-NH-coast

CONCRETE OR CEMENT MIXER

2009-12-21T18:48:31-05:00

WISCONSIN, Mixer, is 8hrp. pull-along, with 2inch hitch, good condition. $ 1,400.- ( 603-244-0600 ) ma-nh-coast

Craftsman Snow blower 29" 9 Horse (Danvers Ma.) $650

2009-12-21T18:43:08-05:00

29 inc. 9 horse power 4 years old.Not used mutch,that's why i'm selling.Electric start,5 forward speeds,and revers.Please call Jim @ 978-762-7350.Thqnk you.

CEMENT MIXER

2009-12-21T18:40:34-05:00

HUSKY, Electric cement mixer, only used once, all steel, no plastic. $ 225. 603-244-0600 - Ma-NH-coast

diesel generator 2.5kw-110/220v 1ph new Eliminator (Tewksbury) $875

2009-12-21T18:21:18-05:00

I bought this 2500 watt genset 3 yrs ago for emergency and never used it. started it up to check it out . runs great. 110 and 220 volt receptacles single phase. -Will run all day for pennies on diesel fuel .Will run a house oven.stove.microwave only one at a time. . I had this stored in the garage and a little gas dripped on one top cover and stained it. Otherwise it looks new. $875 obro cost $1087 with freight - My loss. Also have a 5,000 watt single and 3 phase 110/220 volt mil generator with 7 hrs. use, not broken in yet elec.start. $3200 cost $18000 at todays prices.Runs fantastic,
call 508 846 0773 If it's posted here now it is STILL available. Call for a looksee. Thanks! And don't be caught with the lights out like at cape cod.

Kohler 45KW Gen w/ Trans Switch (Rockport) $3200

2009-12-21T18:02:11-05:00

For Sale: Kohler Fast Response 45 KVA Generator, Model #45RZ62 with Kohler Automatic Transfer switch, 240Volt, 150AMP. Set up for Natural Gas, easily converted, 10 yrs old. Fully Maintained. 88� long, 29� Wide, 44� High to Muffler. Approx 1500 lbs. 570 Hrs.
Asking $3200.00 or Best �Reasonable� Offer, NO Trades..
Email for more information.

Jointer-Planer (Newburyport) $200

2009-12-21T17:12:05-05:00

Craftsman 6 1/8" jointer planer comes with base that has retractable wheels. Excellent condition, hardly used. Model #133.206801 Can be delivered.

Honda mulching lawnmower $75

2009-12-21T17:01:43-05:00

Honda mulching lawnmower runs good harmony series 75.00 call (978)532-9342

19.2 mac tools cordless impact (revere) $50

2009-12-21T16:55:50-05:00

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270504447419&viewitem=&sspagename=STRK%3AMESELX%3AIT

theres the link to my auction page, I have restrictions set up on the page that you have to have a paypal account set up to bid!
goodluck

Pipe staging (Groveland) $75

2009-12-21T16:48:56-05:00

Have 100 sections of pipe staging plus planks picks

24,000 pound lift bag for underwater salvage--NEW IN CRATE (Atlanta) $395

2009-12-21T15:34:00-05:00

Will deliver for a fee. This is a large bag ( 10-12' diameter and 3-4' high ) and is about 180 lbs of very thick rubber. I have SIX of these new in the crate. Shipping weight is 331 lbs. and crate volume is 1.1 cu/meters ( or 41 cu/ft ). Original use was military aircraft maintenence but most probable use is for underwater salvage. These all include a 25' ( minimum ) 1" ID hose at 200PSI and also a heavy canvas sling/cover with aluminum buckles. Please call MIKE for more info @ 770.833.7915.

Craftsman 1.5 hp 140 psi compressor (Newton, NH 03858) $100

2009-12-21T14:51:24-05:00

Please view this item and note that you can buy with confidence that it will perform new.
I have been repairing small engines, etc. for over 31 years! I only sell a quality product.

Cash only, price is FIRM, NO NEGOTIATONS! Low offers will NOT be responded to.
Serious inquiries will leave their name and phone #. Please be serious, don't waste my time and yours.

* This compressor shuts off at 140 psi not 125 psi
from 0 psi - 140 psi takes 1.5 mins to fill tank

1.5 hp oil-type compressor
3 gal tank
2.4 CFM @ 90 psi
3.7 CFM @ 40 psi
cut-in pressure 90 psi
cut-out pressure 140 psi

Great for running air tools like ratchets, impact guns, nail guns, etc.

Makita grinder - for PARTS or repair (Newton, NH 03858) $20

2009-12-21T14:30:20-05:00

Makita grinder model # 9527NB for PARTS or repair
motor starts to smoke when turned on
cord, switch, housing, gear box all good
what you see is what you get

Leave your name and # and I will call you

* shipping is available for an added cost

skil worm gear skill saw (Lynn MA) $90

2009-12-21T14:30:15-05:00

brand new in box. cash only firm priced Neal 781-599-2526

TOW BEHIND GAS CEMENT MIXER (METHUEN) $900

2009-12-21T14:26:22-05:00

HI I HAVE A TOW BEHIND GAS POWERD CEMENT MIXER FOR SALE . THIS MIXER IS IN GOOD SHAPE IT COULD USE SOME PAINT BUT THERE IS NO RUST IT IS JUST YOUR TYPICAL USED CEMENT MIXER.
THIS CEMENT MIXER HAS A 8 HP BRIGS AND STRATON ENGINE THAT RUNS VERRY WELL . THE DRUM IS IN GOOD SHAPE AS WELL THE TIRES ARE IN OK SHAPE BUT NOT NEW. IT IS A TOW BEHIND
MODEL WICH REQUIRES A TWO INCH BALL HITCH . I HAVE AN EXTRA ONE WHICH I WILL GIVE TO WHOEVER BUYS IT FOR NO COST . THESE MIXERS SELL FOR $3000 PLUS SO I AM ASKING A VERRY FAIR
PRICE . THE MIXER THAT IS IN THE PICTURE IS NOT MY MIXER IT IS A BRAND NEW ONE .BUT IT IS THE SAME MODEL JUST DID NOT HAVE ANY PICTURES OF IT BECAUSE IT IS IN STORAGE AND JUST CANT
GET THERE RIGHT NOW.

tile cutter not a power cutter (lynn ma) $25

2009-12-21T14:26:05-05:00

cutter brand new. cash only. call Neal 781-599-2526

screw gun (lynn ma) $35

2009-12-21T14:22:29-05:00

ryobia screw gun cash only. call Neal 781-599-2526

hand solder gun (lynn ma) $25

2009-12-21T14:19:41-05:00

hand solder gun in case with attachments. czsh only call Neal 781-599-2526

skill saw (lynn ma) $25

2009-12-21T14:17:20-05:00

Skill saw 7 1\2 inch good cond. call Neal 781-599-2526

sawzoll blades (north shore)

2009-12-21T13:49:50-05:00

different sizes wood&metal lennox is the brand. 4inch,6,9,10,12 let me no what you are looking.give me a call 1-978-767-0714 $10 a pack 5 blades per pack

MAC Tool cart Yellow (North Reading,MA.) $250

2009-12-21T13:35:42-05:00

MAC Tool cart Yellow

I have a 2 year old Mac tool cart.

It's in excellent shape.

A little dirty and has some scratches.

Stuff in cart Not Included...

$250.00

Call Bill @ 978-319-3191

Please call number for a quicker response.

Bosch 4410L Miter saw (Boxford) $450

2009-12-21T13:03:26-05:00

Bosch 4410L used fro two cuts only and is in new condition just purchased a couple months ago 09 and has never left my house. Also purchased with the saw are the Bosch crown moulding accessory jigs that attach to the saw. Laser and batteries still unused and unopened. This is great price for a great saw that was used for 5 minutes. Still under Bosch warranty. Saw is in the box as are the crown stops. As you can see from the pictures the saw is really in new condition. Price is firm 450.00 cash only. I am not in a bind and do not HAVE to sell.

HEAT YOUR GARAGE> (haverhill ma.) $300

2009-12-21T12:59:42-05:00

reznor hang up heater gas power vented. model ceexl 30-3 30.000 b,t.u. out put. call 978 835 2616. thank you. MERRY CHRISTMAS AND A HAPPY NEW YEAR>

pipe vice (haverhill) $50

2009-12-21T12:02:23-05:00

978 490 8397 elwood works great 50$

2 gravity conveyors (haverhill) $200

2009-12-21T11:27:28-05:00

very heavy duty little rust but work great 18"w 10feet long 978 490 8397 i have 2 of them for 200 or bo

antique push mowers (haverhill) $50

2009-12-21T11:25:22-05:00

old mowers great shape they cut nice i have 3 of them 1 is older then the others please call 978 490 8397 elwood 50 each or bo

antiques hand tools (haverhill) $5

2009-12-21T11:23:26-05:00

978 490 8397 elwood bro many hand tools 2 look at 5$ each

Two 6' Tie-down Assemblies (Woburn) $8

2009-12-21T09:52:27-05:00

Two 6' tie-down assemblies. Each has a two-piece strap assembly, consisting of 1" webbing, one cam buckle, and two S-hooks. Lightly used, excellent condition.

For more info, email me or call Marghi at 781-572-9000

Or you can visit my online store at: Junque-ez Thrift & Consignment Shoppe

biscuit joiner (Woburn) $90

2009-12-21T09:41:20-05:00

Elu 3380 biscuit joiner/spline groover, excellent cond. with case, recent blade.

NEW 2009 EASY-KLEEN GOLD 4000 psi HOT WATER Pressure (MIDDLETON NH) $2300

2009-12-21T09:28:13-05:00

CHECK OUT http://easykleen.com/ FOR COMPLETE DETAILS - THIS IS THE BEST MODEL THE GOLD SERIES
- Check out site - with delivery almost $4000
KEVIN - 603-473-2119 PRICE IS FIRM - CHECK OUT DEALERS PRICE TO SEE WHY

bolens tractor snowblower/lawnmower (so.nh) $399

2009-12-21T09:27:55-05:00

runs great ,model st125, comes with a mower deck for summer and snowblower attachment for winter,hydrostatic drive, stored indoors,comes with chains and wheel weights for snow, 12 h.p. motor, selling only beacause i have a skid steer now for the snow call mike at 978-390-8280

Hickok NGS W/Can Vim(used) (North Shore) $1000

2009-12-21T08:44:30-05:00

Used NGS for sale,comes with CAN vim,EECV cables,EECIV cables,ABS,UBP,and all cards for EECIV and EECV. If interested e-mail or call (978)914-2760.

Rockwell heavy duty SoniCrafter Brand new 37pc special deal (North Boston) $110

2009-12-21T08:34:26-05:00

ROCKWELL heavy duty SoniCrafter Brand new 37pc Variable Speed Professional Kit special deal $ 110.00
RK5101K

The Rockwell®SoniCrafter™ is one of the most versatile and effective power tools ever invented. Super high frequency oscillating action produces a smooth-running tool that can cut, sand, polish, scrape, shape and remove grout. Select from a long list of dedicated accessories to tackle jobs in wood, fiberglass, thin metal, plastic, masonry, carpet and flooring, on and on. Whether on the job site and around the house, the SoniCrafter™ is indespensible. Sonicrafter™ makes quick work of the toughest jobs in remodeling, carpentry, installation, repair and crafting.

All kinds of Power TOOLS and more Brand new (North Boston)

2009-12-21T08:31:16-05:00

All Brand new POWER TOOLS in the box best deal wholsale price All tools are new Models

- DEWALT 1/2'' (13mm) 18V Cordless Compact Hammerdrill Kit - DC725KA $ 165.00

-DEWALT 18V Cordless XRP� Reciprocating Saw Kit - DC385K $ 165.00

-MAKITA 10.8V Compact Lithium-Ion Cordless Driver Drill Kit $ 85.00

-ROCKWELL heavy duty 37 pc. SoniCrafter 2.3 Amps $ 110.00

-HITACHI 18V 1/2" Driver Drill Kit with Flashlight $ 95.00

-DEWALT corless 18 volt 1/2" heavy duty compact drill/driver kit $ 95.00

-MAKITA 18 V heavy duty 1/2" drill/driver kit $ 90.00

-Nikota 1" SDS rotary hammer drill kit $ 125.00

-Dewalt heavy duty 5" random orbit $ 55.00

-Milwaukee 11 amp sawzall plus $ 90.00

-Skil 71/4 skilsaw 12 amp rpm 4600 min $ 30.00

-Heavy duty Dewalt reciprocating saw variable speed $ 70.00

-Dewalt 4 1/2 angle grinder $ 55.00

-Rotozip heavy duty spiral saw $ 90.00

-Makita 4" angle grinder $ 40.00

-SKIL recipro saw heavy duty $ 70.00

-Campbell Hausfeld 100 psi AIR COMPRESSOR with NAILER/STAPLER gun 2 in 1 with complete inflation accessories and nails $ 125.00

-FAUCETS all kinds for - Bathroom/Kitchen/ Bathtubs best quality

-BENJAMINE MOORE paints and primers all colors $ 24.00 a GALON also paint supplies

-AIR CONDITIONS all brand new and all sizes

Also hand tools and machines and hardware all BRAND NEW

Cornwell angle wrench set/LARGE (Revere) $80

2009-12-21T08:03:52-05:00

These belonged to my father who was an aircraft mechanic, I have largest 8 . The largest shown is 1 1/2'', the smallest shown is 1 1/16''. Below is info from their website and the pics. The 21pc set went for over $1000.00 W/ 1 1/2'' being the largest in the set ( it sold for over $100 on it's own).

Cornwell pioneered and engineered the original angle wrench design. For many years these wrenches have been regarded by mechanics and industry as the finest. 15� and 60� head angles on the handle allow maximum nut turning in limited access places. Design gives you four working positions in small swing areas. What�s in the Box? AW3434, AW3636, AW3838, AW4040, AW4242, AW4444, AW4646, AW4848

Craftsman router table (Haverhill) $70

2009-12-20T20:35:19-05:00

Nice craftsman router table with stand. Hardly used.

Mini Excavator Bucket (North Andover, MA) $550

2009-12-20T20:32:40-05:00

Mini Excavator bucket off of a 341 Bobcat Mini. Used very little, asking 550.

Ryobi SCROLL SAW ~ 16" ~ tilt work table (Wakefield + Natick + Delivery Possible) $80

2009-12-20T19:02:08-05:00

MODEL # SC-160 --- Price is Firm!
Early RYOBI - before they moved to redesign everything to sell to the larger market - this is 'shop' grade...not 'home depot' grade.
Some call this a "jig saw" - great for making jig saw puzzles & other fun stuff!
Measures: 22" long ... 12" front to back ...13" tall .....weighs about 30-35 pounds (Really Heavy Frame and Table !!).
16" is distance from blade to the stem holding top head = distance you can cut INTO material before obstruction.

Pick up in Wakefield or arrange to have this delivered (FREE in some local areas on our schedule).

Other tools available - check other ads - search for "Randy 6363" to see all my ads.

Randy 781 * 608 * 6363

Ariens Snowblower (Beverly) $325

2009-12-20T18:33:15-05:00

WINTER IS HERE! NOT LOOKING FORWARD TO SHOVELING? This Ariens 7 HP snowblower will do the work for you. 24.5 inch cutting path - self propelled - 5 forward speeds - reverse - chains on tires - runs well - maintained well. Sold my house - no longer need it. Contact via email only. Cash sale only.

all kinds of tools and power tools (danvers)

2009-12-20T18:11:19-05:00

2 yr old only used 4 times-ryobi 9inch band saw.i payed $120.00,,asking $50.00,,its brand new still in box. [[[[[[ also have a 18volt radial arm saw and 18volt sawzall comes in case,,only used for a 1 mnth project,,,needs battery,,,i payed 2 yrs ag $180.00 for the whole collection,,selling the saw and sawzall for $50.00 with case,,,,also have a 200 peice dremel accessory kit,,,,i payed $120.00 asking $30.00,,,also have a brand new pair of hk porter 24inch bolt cutters still in box never used for $25.000,,,i also have a couple of different size tool boxes and some old power tools for sale,,,call dave at 781---866-6517,,im in danvers mass

glass cups (salem mass)

2009-12-20T17:52:56-05:00

ive got 3 glass cups from crl. one is brand new and the other are fairly new.. make me an offer for the 3 of them. 978 854 2837 text me or call for more info on these glass cups

JOINTER-SIX INCH CRAFTSMAN (GLOUCESTER) $125

2009-12-20T15:39:12-05:00

OLDER CRAFTSMAN 6 X 36 INCH BELT DRIVE, 1/2 HP WITH IRON STAND, GOOD CONDITION, NEW BLADES,
APPROXIMATELY 250-300 LBS, CALL AL 978-290-1631

JOINTER-CRAFTSMAN 6 INCH (GLOUCESTER) $125

2009-12-20T15:18:55-05:00

CRAFTSMAN SIX INCH BY 36 INCH JOINTER--OLDER MODEL 103.20620, 1/2 HP BELT DRIVE, ON ORIGINAL
IRON STAND, FAIRLY NEW BLADES, WEIGHT APPROX 250-300 LBS -CALL AL 978-290-1631 OR 978-281-1958

TACO ZONE VALVES 571-2 (GLOUCESTER) $50

2009-12-20T15:17:41-05:00

SIX (NEW IN THE BOX) TACO GOLD SERIES, 2 WAY, ZONE VALVES, MODEL 571-2, 24 VOLT, 3/4 SWEAT, 125 PSI
ALSO TEN BOXES OF WATTS RADIANT 1/2 & 3/8 STAPLES, #668018-1000 BEST OFFER, TACO IO75C3R-1 THREE WAY MIXING VALVE, iSeries-R OUTDOOR RESET, I-VALVE, 3/4 INCH, SWEAT, 3WAY W/OUT, NEW IN BOX, BEST OFFFER, CALL AL 978-290-1631 OR 978-281-1958

RIDGID 24" pipe wrench (middleton) $10

2009-12-20T14:39:12-05:00

RIDGID 24" pipe wrench.....used......$10.00 / best offer.....questions welcome

NED CUT....used 24 " diamond wet blade (middleton) $100

2009-12-20T14:27:37-05:00

NED CUT....used 24 " diamond wet blade....2100 rpm max......some rust from sitting in garage.....$100.00/ best offer.....questions welcome

RIDGID #5 strap wrench....MINT!! (middleton) $25

2009-12-20T13:43:37-05:00

RIDGID #5 strap wrench....MINT!!.....i do not beleive it has been used.....$25.00/ best offer....questions welcome

greenlee punch set (marblehead) $400

2009-12-20T13:36:24-05:00

Greenlee punch set #7906SB qick draw set 1/2 "to 2 ' set $400.00 617-594-0441 list for over 900.00 new

Shaper cutters (W. Newbury) $750

2009-12-20T13:25:02-05:00

I have sold my shaper, now I need to sell the shaper cutters. As a lot price of $750. Or individually per the last column. I have had these for sale for a bit and folks have asked how I arrived at my price. So I have found all of the retail prices and understand that no one pays retail. I also searched for the best sale prices I could find and listed these in the second column. I then took half off of the discounted price to arrive at the individual prices per the last column. Seems reasonable to me, but if you want to make an offer, please do. (Sorry that craigslist does not allow to keep the columns as I had listed everything, but the info is all there.) Thanks.

back row left to right
Brand Material Type Bore Model # Condition Retail Discount Price Each
Freeborn carbide corner rounding 1-1/4" PC-25-012 used once $301.00 $255.00 $127.50
Freeborn carbide door edge detail 1-1/4" PC-17-027 little use $199.00 $169.00 $84.50
LRH carbide 3" straight cutter 1" K-1453 used $306.00 $214.00 $107.00

middle row left to right
Brand Material Type Bore Model # Condition Retail Discount Price Each
Freud carbide 1/4" half round 1-1/4" UP-120 used $146.00 $82.00 $41.00
Freud carbide 5/8" half round 1-1/4" UP-123 new $186.00 $103.00 $51.50
Freeborn tangtun 1-1/2" radius qtr round 1-1/4" PT-25-024 just sharpened $475.00 $403.00 $201.50

front row left to right
Brand Material Type Bore Model # Condition Retail Discount Price Each
Freeborn tangtun 1/2" radius qtr round 1-1/4" PT-25-008 used $293.00 $249.00 $124.50
Freeborn tangtun 3/8" radius qtr round 1-1/4" PT-25-006 used $236.00 $200.00 $100.00
LRH carbide 1" straight groover 1" K-1446 used $164.00 $114.00 $57.00
LRH carbide 3/8" straight groover 1-1/4" K-1441 used $117.00 $82.00 $41.00
LRH carbide 1/4" straight groover 1-1/4" K-1440 used $112.00 $78.00 $39.00

TOTALS $2,535.00 $1,949.00 $974.50

Hydraulic trolley jack (W. Newbury, MA) $35

2009-12-20T13:18:52-05:00

Hydraulic trolley jack. 4,000 pound capacity. 5 1/2" - 15 1/4" lifting range. $35. Thanks

Woodworking tools (Methuen) $100

2009-12-20T12:46:48-05:00

$100 - Freud Plunge Router FT2000E includes:
- 3 1/4 HP
- Variable speed 22500 - 10000
- 1/4" and 1/2" collets
- (no bits)

$40 - Freud brass template guide set

$75 - Custom built tilt-top router table 21" x 39.5" x 34.5" includes:
- Fence
- Miter track
- 2 Doors
- 3 drawers
- Adjustable feet

$40 - Flat top, chop saw bench 21" x 54" x 32"
saw not included

FREE - 30" x 80" Glue up table top. Hollow core door laminated with Formica.

Drywall guns $20 each

$40 - Delta mortising attachment for drill press

Louisville 32' Fiberglass Type IA 300lb Ladder (Methuen, MA) $275

2009-12-20T11:46:09-05:00

Louisville model L-3022-32 ~ Type IA, Fiberglass Extension ladder ~ 300 lb. Load Capacity,
Extra Heavy Duty Industrial Use. Weighs appx 70lbs, maximum extended lenght = appx 29 feet. Like new condition, used only once, perfect working order, no problems of any kind. Paid $330+ new.

B&G Oil-less vacuum pump (Newton, NH 03858) $75

2009-12-20T11:17:12-05:00

Cash only, price is FIRM, NO NEGOTIATONS! Low offers will NOT be responded to.
Serious inquiries will leave their name and phone #. Please be serious, don't waste my time and yours.

B&G (Bell and Gossett)
dual stage vacuum pump
model # SYC 19-1
1/3 hp AC motor
115 V AC
6.4 amps
single phase
1725 RPM
has been tested and runs great
what you see is what you get

Can be used to pull vacuum or to run a air brush, etc. You could also build you own air compressor.

Metal Toolbox and Tools $30.00 or best offer for all (Lynnfield)

2009-12-20T10:58:08-05:00

Heavy Duty metal "Park' brand Toolbox 16" long x 8" high x 8" deep
With metal tray insert.

Tools: hammer, 2 pulleys, various drill bits, files, and pipe wrenches, Old but good condition

Cash Only

graco airless srayer

2009-12-20T10:20:58-05:00

I have a graco tradesman 150 sprayer, like new, all I used it for was to spray a 12x15 tin ceiling, works great $200.00

John 978-979-5949

Drills / Sawzalls / Grinders Power TOOLS Brand new in the box (N-Boston)

2009-12-20T10:03:22-05:00

______POWER and HAND tools and more still in the box not open i dont have them all listed here also have some used tool

-DEWALT 1/2'' (13mm) 18V Cordless Compact Hammerdrill Kit - DC725KA $ 165.00

-DEWALT 18V Cordless XRP� Reciprocating Saw Kit - DC385K $ 165.00

-MAKITA 10.8V Compact Lithium-Ion Cordless Driver Drill Kit $ 85.00

-ROCKWELL heavy duty SoniCrafter 37 pc. $ 110.00

-DEWALT corless 18 volt 1/2" compact drill/driver kit $ 95.00

-HITACHI 18 v. Drill/Driver 1/2" with flash light $ 90.00

-MAKITA 18 volt 1/2" heavy duty Drill/driver $ 95.00

-Nikota 1" SDS rotary hammer drill kit $ 125.00

-Dewalt heavy duty 5" random orbit $ 55.00

-Milwaukee 11. amp sawzall plus $ 90.00

-Skil 71/4 skilsaw 12 amp rpm 4600 min $ 30.00

-Heavy duty DEWALT reciprocating saw variable speed $ 70.00

-Dewalt 4 1/2 angle grinder $ 55.00

-Rotozip heavy duty spiral saw $ 90.00

-Makita recipro saw heavy duty $ 70.00

-MILWAUKEE 1/2 sheet Orbit Sander heavy duty $ 55.00

-Compressor with Nailer and attachments $ 125.00

-BATTERY,S all sizes and packages AAA - AA - C - D - 9 - VOLTS

-All kinds of FAUCETS for Kitchen/Bathroom/Bathtub All mixed and good quality

-AIR CONDITIONS ( 9800- BTU $ 150.00 ) ( 8000- BTU $ 125.00 ) and ( 5000 BTU $ 75.00 )

-LOCKS Bedroom / Bathroom / Entrance and more

-------also hand tools and machines all in the box , if you,re interested send me your #

" ATTN " MASONS (MERRIMACK VALLEY) $200

2009-12-20T09:50:18-05:00

WHAT CAN I SAY. IT'S BRAND NEW-NEVER USED. 12' EXTENTION, $200.00 TAKES IT, 978-869-8166

CARPENTER/TRADE TOOL BELTS (BEVERLY/WINCHESTER/CONCORD) $15

2009-12-20T09:33:19-05:00

These are leather carpenter/trade tool belts both for a cheap price for $15 ea. Call Jon 781-879-9865

Campbell Hausfeld Airless paint sprayer (Salem, MA) $90

2009-12-20T09:23:30-05:00

Used Airless paint sprayer (made in 1999) for $90! In good working condition. Pickup ONLY. Cash or Paypal ONLY

Snap On Wrenches (Wilmington) $450

2009-12-20T08:34:23-05:00

I have a set of Snap-On open end wrench 4-way angle head wrenches that I no longer use VS-12 thru VS-40. Total of 15 wrenches with pouch. Asking $450.00 or B.R.O.

marklift 80' telescoping man lift (salisbury) $16000

2009-12-20T05:42:23-05:00

nice low hour (2600) 1996 marklift CH80C boom lift,4x4 with new big,wide foam filled tires.3.9 cummins deisel that purrs like a kitten,starts instantly,no smoke or leaks,the lift runs and operates great,has new guide blocks on all boom sides,very powerful lift will go anywhere,operates and functions as good as a new one for a fraction of the price,weighs 37,000 lbs and is extremely stable and sure footed on all terrains,turn key,job ready,everything works 100% as it should,very reliable,other than paint,you wont find a better one,it runs that good,thanks.978-462-9099

Electric/hydraulic 2500lb.pallet lift (salisbury) $400

2009-12-20T05:37:28-05:00

LIFT-RITE H25E self contained pallet jack has 4' long forks and lifts 2500 lbs.about 3' off the groung for loading and unloading pickup trucks.Also,this forklift makes a great stable lift for working on motorcycles and equipment.12 volt system with charger,hydraulic lift.Sells for $3k new.This lift works perfect,but is rarely used,so it needs to go.reduced to only $400,thanks 978-462-9099

big hyster 30'all terrain platform lift (salisbury) $3000

2009-12-20T05:35:45-05:00

V-30-SRT-2G rough terrain scissor lift with 2000LB capacity (double that of most lifts of this size)on 7'6"Wx13'6"L deck with extentions installed and 36'work height.Foam filled skidsteer tires(2 new)4-cyl.gas wisconsin industrial engine,only 1700 hours on unit and it shows.Very tight machine,loads of room and capacity for tools and personnel,very stable lift,great for iron workers,masons,sand blasters,painters or anyone who works with heavy materials that most lifts arent good for.top and bottom controls,this unit ran perfectly until it sat for a while(has not been used in a year,still starts right up and runs and operates great, but something is not right in the drive circuit from sitting,it operates 100% power as it should,then 50% or less,then back to 100% randomly,drive motors are all good,(look fairly new),as is pump?,probably a switch,solinoid or sticky control valve?)needs to be checked by someone that knows what to look for,probably something minor because it was trouble free since ive had it untill it sat.all other circuits function fine.originally asking $9500,but need it gone,my loss is your gain.price reduced again to less than half of my cost to $3000 FIRM thanks 978-462-9099

Skyjack 32'all-terrain scissor lift (salisbury) $5500

2009-12-20T05:33:47-05:00

this 1999 model SJ-111/6832 electric hydraulic scissor lift is in near new condition with only 460 hours on it and all original paint and safety decals still look great.It is an all terrain model with foam filled 22"Hx10"W turf tires,good for indoors or outside use.No noise or fumes.Deck is 5'Wx7'L and extends to 10'L.Rails fold down to go through doorways,reduceing height from 8'to7' tall.Lift capacity is 1000 LBS.and has 38' work height.has 110volt GFI receptacle on deck for power tools.Totally self contained 24 volt electric hydraulic lift is 100% work ready with and none nicer,need the space and dont want to put it outside,reduced from $7500 to $5500 FIRM,978-462-9099

Black and Decker Finishing Sander (Rowley) $20

2009-12-20T02:34:04-05:00

Black and Decker Finishing Sander

Double Insulated

Works great!

Craftsman dado blade (Rowley) $20

2009-12-20T02:32:28-05:00

Craftsman wobble dado blade - Great Condition!

Sliding Miter Table System (Rowley) $80

2009-12-20T02:31:44-05:00

NEW! NEVER BEEN USED!

Craftsman part #932066

System includes Table, Guide Rails, Miter Fence, Length Stop Guide

Can be used with Craftsman 10" or 12" table saws

Other tools available as well. Please email me for list.

table saw (salem) $75

2009-12-19T21:10:52-05:00

table saw.. for more info give me a call paul 781 710 0173

alignment machine hunter (salem ma) $599

2009-12-19T21:09:59-05:00

Hunter G111 alignment machine. we use it daily, but I am getting a new machine.
for more info call , paul 781 710 0173

HOMART CEMENT MIXER (NEWBURY) $300

2009-12-19T19:50:20-05:00

HOMART CEMENT MIXER GOOD CONDITION, ELECTRIC. 300.00 / BO 978-462-7063

Troy Bilt Pressure Washer (Billerica MA) $200

2009-12-19T17:21:29-05:00

2200 Max PSI, 2.2 Max GPM, Briggs and Stratton engine

Reddy Kerosene Forced Air Heater 115,000 BTU (Reading) $175

2009-12-19T16:41:27-05:00

115,000 BTU per Hour
Heats up to 2,700 square feet
10.5 hour run time on full 9 gallon tank
490 (CFM) Hot Air Flow
Thermostatically Controlled
Sells in stores for more than $400

Reddy Propane Forced Air Heater 150,000 BTU (Reading) $175

2009-12-19T16:40:23-05:00

Reddy Heater, Variable BTUs 75,000 -150,000 Portable LP Gas Heater, Hose & Regulator Included
Sells for $350 in Stores

Hirsh Saw Table (Peabody) $25

2009-12-19T15:15:41-05:00

Table size 20" X 27"
Mount a circular saw to make a saw table or
mount a router to the table.
Table folds for easy storing.

3/PH.3HP.ELEC/MOTOR (N SHORE)

2009-12-19T14:33:01-05:00

GOULD.1750rpm..230/460..S182T.frame..1 IN 1/8 SHAFT NEW COND ..$40.00

MULTI QUIP GENERATOR 6K (SALEM NH) $950

2009-12-19T13:32:20-05:00

MULTI-QUIP GENERATOR 6K WATT. GENERATOR IS IN GREAT CONDITION. $950-

Lever Hoist (Burlington) $45

2009-12-19T13:17:11-05:00

Lever hoist - 4,000 lb capacity
stainless steel aircraft cable
hardly used

$45

Industrial 500 Watt Portable Halogen Worklight (Woburn) $9

2009-12-19T12:25:04-05:00

Industrial 500 Watt Portable Halogen Worklight... Black and Yellow in color. Like-new condition.

Rain Barrels (Melrose) $50

2009-12-19T12:09:14-05:00

Blue 50 gallon rain barrels, all set up with spicket and cut out in top for your down spout and ready for use, cash only pick up only call Terry 617-293-5567

Metal wheel Barrel (Melrose) $50

2009-12-19T12:08:27-05:00

Used, metal wheel barrel, has flat front tire cash only pick up only call Terry 617-293-5567

Lincoln Arc Welder AC225S (Georgetown) $120

2009-12-19T11:58:48-05:00

Make an offer.
Lincoln Arc Welder AC225S. This welder was given to me 7-8 years ago and I was told it was working at that time. I never had or took the time to hook it up to use and it has been sitting in my garage and shed for the past 7-8 years. Unit is being sold AS-IS with no warranty of any kind.

I'm told by my friend this was a great welder and served him well. I know nothing about welding and am unable to offer any insite.

I have seen this model welder go for $160.00 during online auctions. Unit is 3 prong all in same direction.

Price is negotiable within reason. If you live local and have a hook up you could pick it up and plug it in and see if it is working fine before purchasing.

Pump Staging Jacks Set of four (Lynn, MA Off of Eastern Ave.) $30

2009-12-19T11:47:17-05:00

I have four pump jacks for sale. They are at least 15 years old made by Lynn Ladder. For those who don't know
that's a good thing. They have less than the usual amt of rust I tried to keep them painted up (but they are made
of steel.) I think you can these at a home improvement store for more than twice the cost but in my opinion these
work better. 30.00 each or make me an offer on all four.

Or search Graiglist with cyrus4692 and my other ads will pop up.

Brand new air assist oil drain (SMaine) $199

2009-12-19T11:34:22-05:00

In Stock and ready to go to work for you. This 18 gallon oil drain uses air evacution to eliminate the misery of draining the oil bucket. Delivery available
207-636-0138

New 1000lb trans jack (SMaine) $199

2009-12-19T11:31:29-05:00

In stock and ready to go to work Brand new Atlas 1000lb trans jack
207-636-0138 Delivery available

WHY buy a used lift? 9000lb Atlas (Delivered) $2100

2009-12-19T11:29:02-05:00

This is a true 9000lb lift The Atlas oh9000 comes complete with truck adapters and all needed hardware for installation. This is a true 9000lb lift not a cheap imitation! Short delivery times. The drive over ramp type is also available for ceiling clearances under 12 feet for the same price.
207-636-0138

Brand New Wheel Balancer (SMaine) $1700

2009-12-19T11:23:42-05:00

The Atlas wb 52 balancer is built to exacting standards. Perfect for any size shop as this is a top of the line machine. In Stock and delivery is available
207-636-0138

Brand New Atlas Rim Clamp (SMaine) $1700

2009-12-19T11:20:16-05:00

The Atlas 289 is the perfect answer for high cost machines. This professional machine is expandable to add assist arms, features a superior bead blaster and an adjustable bead breaker to handle the widest wheels. In stock and delivery is available
207-636-0138

mobile machine base (Beverly) $65

2009-12-19T11:19:22-05:00

for sale is a very heavy duty wheeled machine base, the u-shaped portion you see that actually holds a machine is made from 3/8 inch thick steel. The inside measurements are 23 inches side to side and 22 inches front to back. I know for sure that this will hold a Powermatic 65 tablesaw and probably a Delta Unisaw as well but you better measure to be sure. It is adjustable for height to be as close as one inch to the floor and as high as 10 inches from the floor and has 2 locking casters. very nicely made
$65 obo
you can email but phone is good too 978-922-5534 Gary

Brand New Rim Clamp (SMaine) $1300

2009-12-19T11:11:23-05:00

Brand New Rim Clamp, scratch protection bead blast in stock and ready for immediate delivery.
207-636-0138

American Floor Sander (Newbury) $25000

2009-12-19T10:29:26-05:00

Excellent machine. 4 horse motor. Recent drum. Incudes 100 ft cord.

$25,000. firm.

Mark MacDonald 978-462-5099

Power TOOLS / Hand TOOLS and more all Brand new (North of Boston)

2009-12-19T09:54:42-05:00

All Brand new POWER TOOLS in the box best deal wholsale price All tools are new Models

- DEWALT 1/2'' (13mm) 18V Cordless Compact Hammerdrill Kit - DC725KA $ 165.00

-DEWALT 18V Cordless XRP� Reciprocating Saw Kit - DC385K $ 165.00

-MAKITA 10.8V Compact Lithium-Ion Cordless Driver Drill Kit $ 85.00

-ROCKWELL heavy duty 37 pc. SoniCrafter 2.3 Amps $ 110.00

-HITACHI 18V 1/2" Driver Drill Kit with Flashlight $ 90.00

-DEWALT corless 18 volt 1/2" heavy duty compact drill/driver kit $ 95.00

-MAKITA 18 V heavy duty 1/2" drill/driver kit $ 90.00

-Nikota 1" SDS rotary hammer drill kit $ 125.00

-Dewalt heavy duty 5" random orbit $ 55.00

-Milwaukee 11 amp sawzall plus $ 90.00

-Skil 71/4 skilsaw 12 amp rpm 4600 min $ 30.00

-Heavy duty Dewalt reciprocating saw variable speed $ 70.00

-Dewalt 4 1/2 angle grinder $ 55.00

-Rotozip heavy duty spiral saw $ 90.00

-Makita 4" angle grinder $ 40.00

-SKIL recipro saw heavy duty $ 70.00

-Campbell Hausfeld 100 psi AIR COMPRESSOR with NAILER/STAPLER gun 2 in 1 with complete inflation accessories and nails $ 125.00

-FAUCETS all kinds for - Bathroom/Kitchen/ Bathtubs best quality

-BENJAMINE MOORE paints and primers all colors $ 24.00 a GALON also paint supplies

-AIR CONDITIONS all brand new and all sizes

-LOCKS all kinds of doors , and best quality - Bedroom/Entrance/Kitchen/Bathroom and more all half price

Also hand tools and machines and hardware all BRAND NEW

Wovel - wheeled snow shovel - Sno Wolf - folding model (Revere) $130

2009-12-19T09:50:48-05:00

You may have heard of this great invention. You can see mine that I use and buy this BRAND NEW one I have in the sealed carton.

It has been in many magazines from "Time" and "Invention" as well as on TV.

I am NOT putting it on Craigs List to sell it at a steal. I am putting it on so someone can get it right away and not pay tax and shipping.

Amazon and direct from manufacturer you pay about $140 with shipping. I am selling for $130 firm, so please do not ask for a discount.

Visit manufacturer website for EVERYTHING you need to know and learn.

http://www.wovel.com/

These are never on CL, so don't hesitate.

Sears Craftsman 7 inch Circular Saw (Beverly) $10

2009-12-19T09:19:49-05:00

Sears Craftsman 7 inch Circular Saw. 1 1/4 horsepower.
Model 315.11802. With safety lock

Used, outer casing and bottom plate shows some wear. Works well.

OXYGEN ACETYLENE 50' HOSE REGULATORS CUTTING TORCH (north shore) $140

2009-12-19T09:05:38-05:00

2 regulators - 50' hose - cutting torch. Good condition. Airco, older, not abused.