craigslist | tools in metro west

2006 Accupress $74900

2008-09-05T14:33:49-04:00

One (1) 2006 Accupress
BRAKES, PRESS, Hydraulic (Gauge)
Accurpress ETS 3000 3 Axis CNC Controller w/Touch Screen LCD Color
Tonnage 175
Bending Length 12'
Distance Between Housings 10'-5"
Stroke 8"
Open Height 14"
Closed Height 6"
Throat Depth 10"
Ram Speed Fully Adjustable
Motor 20 HP
Floor Space 150" x 52" x 92"
Equipped With Flush Floor Frame
Ram Tilt
Accurpress ETS 3000 3 Axis CNC Controller w/Touch
Screen LCD Color Monitor
Includes Accurpress Tooling as Below:
Dh 3"X 3" Die Holder
GN-4 Gooseneck Punch (12 Foot)
L7 1" Die
Flame Hardening of Punch
Flame Hardening of Die
Safety Tang Machined into Punch
Voltage 230/460

Price: $74,900.00 IN EXCELLENT CONDITION!

2006 Accurshear $44500

2008-09-05T14:33:23-04:00

One (1) 2006 Accurshear
SHEARS, HYDRAULIC, GUILLOTINE
$44,500.00
1/4" X 12' Hydraulic Shear
Includes 24" Front Support Arms
8' Squaring Arm
T-Slots in table w/scales
Ball Transfers in Table

Price: $44,500.00 IN EXCELLENT CO0NDITION!

kelly paint line sprayers (metrowest) $1100

2008-09-05T14:17:26-04:00

3 kelly paint ( line ) sprayers , 1 running , one can be ,, 3 rd for parts , 1 st has new honda engine , a lot of cones , stencls if you want them ,, some extra parts .

1500W Gasoline Powered Portable Generator (Milford, MA) $90

2008-09-05T11:03:06-04:00

This is a 1500-watt (maximum) gasoline powered portable generator. The engine is a Kawasaki 4-cycle. It runs fine and always starts on the first pull even after sitting for months. It sits firmly on the ground on built-in rubber feet and is very quiet. The outputs are 120-volts ac and 12-volts dc.

Set of Toledo Pipe Dies and Pipe Cutter (Milford, MA) $50

2008-09-05T11:02:41-04:00

This is a set of seven pipe thread cutting dies made by Toledo. The die sizes are 1/8-inch. 1/4-inch, 3/8-inch, 1/2-inch, 3/4-inch, 1-inch and 1 1/4-inch. All are in good condition. One cutter on the 3/8-inch die has a couple of chipped teeth but works fine anyway. There is also a Trimo 1/8 - 1 1/4-inch pipe cutter. These are quality American made tools, not cheap "Harbor-Freight" Chinese tools.

Craftsman 1/2 HP motor (Bellingham) $30

2008-09-05T10:13:06-04:00

Craftsman 1/2 Horsepower capacitor motor. 3450 RPM, 60 cycle, 115 volts.

Toolkraft Shaper (Bellingham) $40

2008-09-05T10:10:47-04:00

Toolkraft Shaper with attachments. 1 Horsepower, 115 V, 60 cycle, 10 amp, 18000 RPM

Coleman Powermate Generator (Bellingham) $300

2008-09-05T10:08:57-04:00

Coleman Powermate Maxa Generator. 10 horepower, 41 amps, 120/240 voltage. Runs great. Barely used.

Warning; all ads from "Jim" at MA/RI Tel# 401-952-9452 Warning (Pawtucket RI)

2008-09-05T09:57:34-04:00

Warning-Warning-Warning!

Watch these guys! We had a couple of conversations with "Jim" and we sent a truck down yesterday to pick up a drill press�.What a creepy nightmare it was like a speak easy, door opens, a Boris Bad-enough figure tells our guys to wait here shuts door then comes back and says "OK follow me". Then Boris Karloff comes out and things get creepy. Cash only, OK but when our guys asked for a signed receipt everyone freezes. We don't give receipt's here Boris says and puts cash in pocket. My guys call me on what to do...get out, I tell them. Boris doesn�t want to give money back and demands to see identification! Well my man took the money back and got out of there. I get a call from "Jim", why are we creating a problem...I tell him we are calling the cops and posting on craigslist. If I end up swimming with the sushi, tell my widow it's Jim's boys who did it.
You are warned, these guys are not what they claim, don't buy there or you may get the tools confiscated when they get busted.

Router Porter Cable 6912 (Waltham) $50

2008-09-05T09:48:26-04:00

Porter Cable Route 6912 with base 6911 1/4 Collet missing Collet Wrench

Craftsman Professional 10" Cast Iron Table Saw w/stand (Marlborough) $200

2008-09-05T09:13:03-04:00

Excellent condition - no photo because it is unassembled and ready to go

Craftsman Professional 10" Radial Arm Saw w/stand (Marlborough) $250

2008-09-05T09:11:39-04:00

Excellent condition - no photo because it is unassembled and ready to go

Stanley 60 lb. hydraulic jackhammer (Westfield,Ma) $900

2008-09-05T07:56:48-04:00

Stanley 60 pound hydraulic jackhammer,used once since factory rebuild.This hammer is in excellent condition, with brand new hoses and quick disconnects couplings with brand new points and soil/asphalt chisels
This hammer is able to operate off of and BOBCAT,CATERPILLAR,NEW HOLLAND,CASE,JCB, etc. type skidsteer or equipment that is capable of auxillary hydraulic hookups.
Check out the price for a new and you will be looking at $1,500 plus
Surplus unit and bits that is no longer used. $900.00 CASH!
cal 413-204-2875

Air Operated Grease Pump/Dispenser (Norfolk MA) $50

2008-09-05T04:50:08-04:00

Air operated Grease Pump dispenser. $50. 508-395-0904.

Tool Chest (Norfolk MA) $150

2008-09-05T04:49:17-04:00

Red Tool Chest. 3ft 8in across, 4 1/2ft tall. $150 or best offer. 508-395-0904.

For Sale or Trade Snap on (Bellingham) $1500

2008-09-05T00:25:39-04:00

I have a snap on toolbox that I no longer use it is roughly 6 feet tall by 3 feet wide it is in good condition I am looking for 1500.00 or partial to full trades thanks Joe will post pics soon thanks 508 844 1826

Radial Arm Saw (Hopkinton) $59

2008-09-04T23:36:47-04:00

Craftsman 2HP. The rotating blade travels on the radial arm. It alos tilts and twists. Very versatile machine, and boy that motor hums. Nice machine.

Call me,

Daniel
508-922-8888

8" Craftsman Portable Table Saw (Hopkinton) $75

2008-09-04T20:29:24-04:00

8" Craftsman portable table saw.

Honda Pressure washer (Medfield) $200

2008-09-04T20:26:01-04:00

Honda engine pressure washer 2600psi in good condition.

Comes as shown with hose and nozzle.

Excell XR2600 5HP Premium Pressure Washer

Pressure Washer 6.5 Horsepower (Needham) $150

2008-09-04T20:05:30-04:00

This is a gasoline powered pressure washer. It is 6.5 horsepower. It has a chemical injector function if you need to wash a house down with a chemical through the pressure washer. it comes standard with the hose and gun. it is in very good condition basically as good as new. It has been used less than 10 times. Please email me if you are interested, buyer is responsible for transportation.

the manufacturer is ChoreMaster and it is a CV series.

Graco electric paint sprayer (Natick Mass) $75

2008-09-04T19:52:36-04:00

This is an older graco unit. Pump is working fine but there is a leak
in the stem area. May just need a good cleaning.
pick up cash only

Set of 5 Master Lock Commercial padlocks (Framingham) $90

2008-09-04T19:43:28-04:00

5 Masterlock padlocks keyed a like. 2 Are slightly used and 3 are brand new. They have a 2 inch shackle. A steal at $90.00. Call Sal at 508-361-6060

Makita Cordless Drill with Case & Charger (Franklin) $30

2008-09-04T19:00:16-04:00

Makita Cordless Drill with case and charger ~ works but battery won't hold a charge for too long.

LIKE NEW Skil 5700 7 1/4" 2.6 HP 13 amp circular saw w/ light (Franklin) $40

2008-09-04T18:33:40-04:00

ONLY USED TWICE! Nothing wrong with the saw, I just got a new one as a gift, and now I have one circular saw too many. 13 amp Skil circular saw with 2.6 HP motor, right grip handle, and built-in site light for better view of workpiece, rear depth adjustment for proper cutting depth, built in adjustable line guide for easy, straight cuts, and a spindle lock for quick, easy blade changes. Includes one 18-tooth and one 20 tooth blade as well as sturdy hard plastic carrying case that holds saw and extra blades. Sells new for $80 - $100.

craftsmen three drawer portable tool box (Natick MA) $40

2008-09-04T18:19:50-04:00

This tool box is in mint condition no dents or scratches anywhere! This box is one of the biggest portable tool boxes on the market it stores more then enought tools needed for the job. Ideal for plumbers electricians car mechanics ect. My asking price is $40 but don't be shy feel free to give me your best offer. If you are interested please email me by using the link above or call 617 838 4977

snap on tool box (holliston) $1500

2008-09-04T18:19:23-04:00

snap on tool box for sale prof box is 6ft height pay 7500 for box no need got out of bussiness

Delta ShopMaster Drill Press (DP200, mint) (Stow) $75

2008-09-04T17:33:28-04:00

Delta DP200 Shopmaster 10-Inch Drill Press in perfect condition. Moving and will not have a shop for this tool.

I work from home so can show any time of day.

3/4" Drive Eletric Impact Wrench (Hopkinton) $100

2008-09-04T17:28:27-04:00

Dewalt 3/4" Drive Electric Impact Wrench. Used 1 time. As new condition. Cost $ 189.00. Asking $100.00. Call 508-736-8953.

Ariens 724 E Snowblower (mint) (Stow) $500

2008-09-04T17:24:55-04:00

Selling the 724 model (7 hp) similar to this Ariens 624 E Snowblower used six times, perfect condition. Includes manual, all cables.

Moving and no need for snowblower. I work from home so can show any time of day.

LIFT - TelPro Cabinet Lifter (Natick) $600

2008-09-04T16:33:45-04:00

Install Kitchen Cabinet Fast, Easy and Safely. This is a Heavy Duty Professional quality tool. It is designed to be operated by one person. Increase you Kitchen Cabinet Installation productivity. Like NEW CONDITION! Only used for one DIY job.

Rambaudi Vertical Machining Center $55000

2008-09-04T16:11:12-04:00

Rambaudi Vertical Machining Center

Machine is in "Mint Condition" & Very Clean!

Specification:
Model - Ram Center 802
Table Size - 120" x 32"
X Axis - 76" Single Spindle
X Axis - 120" Twin Spindle
Y Axis - 32"
Z Axis - 30"
Spindle Taper - CAT 50
Spindle Speed - 3000 RPM
Motor - 20HP
Control - Dynapath 9000
# Of Tool Holders - 26 (On Each Sides)
Twin Spindle
Two Tool Magazines (One For Each Spindle)

Reduced Price On Rambaudi Vertical Machining Canter - $55,000.00!

ALL OTHER COST ARE EXTRA (DISMANTALING, WIRING, TRANSPORTATION, ETC.)

IF YOU NEED A LARGE "HEAVY DUTY" MACHINING CENTER FOR SHORT MONEY THIS IS THE MACHINE FOR YOU. HURRY, IT WON'T LAST AT THIS RIDICULOUSLY LOW PRICE!

LOTS OF PHOTOS AVAILABLE!

COMMERCIAL 52" LAWN MOWER (Marlborough MA) $2500

2008-09-04T16:08:10-04:00

52" deck commercial hydrostatic mower with 2 wheel selke/velke and grass catcher
brand Ferris
year made 2000-2002
price $2500 or better offer (will make deal if other equip. is purchased)
cash only
I have pictures upon request.
Phone: 978 218 3008 Lucas Costa

Other landscaping equipment availible

pick up or delivery (will charge for delivery)

Wotan Horizontal Boring Mill $25000

2008-09-04T16:05:50-04:00

3" WOTAN TABLE TYPE HORIZONTAL BORING MILL MODEL: B75
NEW: 1970'S

SPECIFICATIONS:
SPINDLE DIAMETER ...................... 3"
TAPER IN SPINDLE ...................... #40
VERTICAL TRAVEL, Y-AXIS ............... 40"
CROSS TRAVEL OF TABLE , X-AXIS ........ 32"
SADDLE TRAVEL, Z-AXIS ................. 32"
SPINDLE TRAVEL, W-AXIS ................ 21.5"
TABLE SIZE, ROTARY 4 X 90 DEGREE ...... 39" X 32"
TABLE LOAD ............................ 3,500 LBS
SPINDLE SPEEDS (20) ................... 15 - 1250 RPM
FEED RANGE (27) ....................... .0008" - .333"
THREADING RANGE (11) ..3,4,6,8,12,16,24,32,48,64 & 96 TPI APPROXIMATE WEIGHT .................... 15,000 LBS
EQUIPPED WITH:
#40 TAPER WITH POWER DRAW BAR
ACU-RITE DIGITAL READOUT
SPINDLE STIFFNER
PENDANT CONTROL
ROTARY TABLE
THREADING
FLOOD COOLANT
10 HORSE POWER MAIN MOTOR

THIS MACHINE IS IN "EXCELLENT CONDITION" AND CAN BE DELIVERED & SETUP ON YOUR FLOOR FOR THE LOW PRICE OF $25,000.00!

Craftsman Dovetail Jig $25 or best offer (Dover, MA)

2008-09-04T15:51:16-04:00

Craftsman Dovetail Jig in perfect shape. Original box. Copy of manual

1997 BRIDGEPORT EXPLORER $13900

2008-09-04T15:37:10-04:00

BRIDGEPORT THREE-AXIS CNC VERTICAL MILLING MACHINE MODEL: EXPLORER I
NEW: 1997
SPECIFICATIONS: OVERALL SIZE OF TABLE .................. 16-1/8" X 42"
TABLE WORKING SURFACE .................. 12-1/2" X 34"
NUMBER OF T-SLOTS ...................... 3 ON 4-3/8" CENTERS
RANGE:
LONGITUDINAL (X) ................. 18"
CROSS (Y) ........................ 12"
VERTICAL, KNEE (MANUAL) .......... 14-1/2"
QUILL (Z) ........................ 5"
THROAT DISTANCE ........................ 14-1/2"
DISTANCE, TABLE TO SPINDLE - UP AT GAGE LINE .................. 6.37"
MAXIMUM UNIFORM TABLE LOAD ............. 300 LBS.
INFINITELY VARIABLE SPINDLE SPEEDS,TWO RANGES ...............60-4,200 R.P.M.
SPINDLE TAPER .......................... #30
FEED RATE, ALL AXES .................... 0.1-250 I.P.M.
FEED INCREMENTS ........................ 0.1 I.P.M.
JOG RATE .....150 I.P.M. RAPID TRAVERSE RATE, ALL AXES .........250 I.P.M. APPROXIMATE WEIGHT ..................... 3,150 LBS.
APPROXIMATE DIMENSIONS:
F-B ....64"
L-R .....64"
HIGH ....87"
EQUIPPED WITH:
BRIDGEPORT #DX-32, DOS BASED, 32 BIT PC CONTROL w/ NUMERIC KEYPAD AND FUNCTION KEYS WHICH ARE LINKED TO A COLOR-CODED ON SCREEN DISPLAY.
FULL FEATURE CAPABILITY INCLUDES THE USE OF VGA COLOR GRAPHICS AND MULTIPLE WINDOWS TO PROMPT THE USER THROUGH ALL CONTROL FUNCTIONS.
THE CONTROL ALSO INCLUDES A BUILT-IN 3.5" DISKETTE DRIVE, A 80 MEGA-BYTE HARD DISK DRIVE AND A RS-232 INTERFACE. BALL SCREWS AND DC SERVO MOTORS FOR ALL AXES POWER DRAW BAR CHROME PLATED DOVETAIL WAYS 3 HORSE POWER SPINDLE WITH RIGID RAM DESIGN.

THIS BEAUTIFUL CNC MILL IS IN "MINT CONDITION" AND CAN BE DELIVERED AND INSTALLED AT YOUR FACILITY FOR THE LOW PRICE OF $13,900.00!

Jewelers Heavy Duty Rubber Mold Vulcanizer (Providence) $375

2008-09-04T15:19:21-04:00

This machine is in great shape and is ready fr someone to get far more use out of it than I did.
Barely used, large Vulcanizer available.
Also have mold frames, plates and thermometer.
Retired Custom Jeweler used this machine to take a mold of custom made pieces in the event a customer had something lost or stolen.
The machine was used about 1-2 hours per month, and is in perfect condition.
This machine is a heavy duty, top of the line model. $375.
A good fit for a Goldsmith, Manufacturer, College Student in a metals Dept, or hobbyist.
Acetylene and air torch set with Acetylene 'B' tank $150

Chainsaw (stow) $50

2008-09-04T15:11:23-04:00

16" Homelite chainsaw 50.00 or BO 978/897-4560

garage tools (worcester)

2008-09-04T14:20:17-04:00

motors manuals 80s to 00 20 ton trk jack 4000 genrac generator runs but no power 20 gal elect air comp 4 and 10 ton portapower 2 lg jack stands 3 ton chainfall and trolley abs hyd testkit oxy acel torch set up w/cart air greese gun nut and bolt bins otc bushing driver set exhaust hoses call 508 795 7838

Vertical Milling Machine (Holliston) $800

2008-09-04T14:15:46-04:00

Perrin vertical milling machine. Swiss made. Medium sized [6ft tall x 3.5 ft sq], 220V 3 Phase motor, table size 19" x 11", MT2 taper, End mill set 3/16" to 3/4". MT2 Keyless drill chuck 5/8", Quill to table max 19", Variable speed drive motor with high and low. Comes with standard 6" swivel vise [not shown]. 8" Angle lock vise is an extra $300 [pictured], Power down feed, manual table movement. Box on side has switches [reversible] and storage cabinet. Nice smooth machine that is tight.
I am at loading dock height and near the dock. Cash only or pick up after check clears.

Email or call Mike 508-429-3350

Brakes & Shears For Sale

2008-09-04T13:04:41-04:00

Brakes & Shears
Available for Immediate Delivery!

Cincinnati 500HSx12 Finn-Power B1253060

Brakes
500 Ton Cincinnati 500H8, 12' OA, 8'6" BH, 1980
400 Ton Cincinnati 400H10, 16' OA, 10'6" BH, 2' Horn, 1965
400 Ton Cincinnati 13-8, 12' OA, Full Angle Brackets Bed & Ram, Air Cl, 1974
350 Ton Cincinnati 350AF10, 12' OA, 10'6" BH, Crowning, 4-Axis CNC, 1990
225 Ton Dreis & Krump 510D, 12' OA, 10'4" BH
180 Ton LVD 180BH18Z, 18' OA, 15' BH, 2-Axis CNC
150 Ton LVD 150-PPE, 10' OA, 8'4" BH, 7-Axis CNC, 1997
138 Ton Finn-Power B1253060, 10' OA, 8'4" BH, 8-Axis, Robot, 2003
135 Ton Pacific J135-12, 12' OA, 10'6" BH, 1976
130 Ton Wisconsin, 10' OA
120 Ton Cincinnati, 10' OA, 8'6" BH
90 Ton Cincinnati 90AF8, 10' OA, 8'6" BH, Crowning, 4-Axis CNC, 1992
90 Ton Cincinnati 90CB8, 10' OA, 8'6" BH, 2-Axis CNC, 1993
88 Ton Amada APX80.25, 8'4" OA, 7'2" BH, 8-Axis CNC, 1998 (2 In Stock)

Shears
3/4" x 16' Pacific 500R16, 48" Back Gauge, 1967
3/4" x 12' HTC 750-12SR, 36" Back Gauge, 1976
1/2" x 12' Cincinnati 500HSX12, 48" Back Gauge, CNC, 2000
1/2" x 12' Pullmax GSA-640, 72" Back Gauge, 96" Front Gauge, CNC, 1998
1/2" x 12' Cincinnati 5000, 48" Back Gauge, 156" Front Gauge, CNC, 1991
1/2" x 10' HTC 500-10A, 36" Back Gauge, 1979
?" x 12' HTC 375-12A
1/4" x 10' Wysong H2510, 48" Back Gauge, CNC, 2000
1/4" x 10' Wysong 1025, 36" Back Gauge, 1982
1/4" x 10' Cincinnati 1810G, 36" Back Gauge, 132" Front Gauge, CNC, 1996
1/4" x 10' Amada M-3060, 36" Back Gauge, 1983
3/16" x 8' Cincinnati 1408, 36" Back Gauge, 1975
10GA x 6' Cincinnati FSUIII, Front & Rear Gauging, CNC, Conveyor, 1990
12GA x 3'4" Lodge & Shipley 2CT40, 24" Back Gauge, 1975
16GA x 3' Famco PA36 Air, 2001 (2 Available)

If you don't find what you are looking for here, we can find it for you!
All machines come with Installation and Setup on your floor.

Old Homelite Chain Saw For Sale (metrowest)

2008-09-04T12:41:51-04:00

Don't know the age or the model or the size... but know it runs awsome!!! don't make them like this anymore, not like plastic stuff you buy today!! Very powerful saw! $150 send a number for a quick reply

10 DRAWER TOOL BOX (WORCESTER) $2000

2008-09-04T12:26:10-04:00

NEW BOX WITH TOOLS INSIDE S& K TOOLS AND SOME EXTRA THIS IS THE BEST OFFER $2000(774)-353-6961 JAY

Metal red classic toolbox (Needham) $5

2008-09-04T11:21:31-04:00

Red metal toolbox with a hasp. Very sturdy. About 18" long. Good condition.

Miller Thunderbolt XL Welder (Millis) $350

2008-09-04T10:36:41-04:00

Never used, excellent condition
Miller Electric Mfg Co 903641 - Thunderbolt XL 225 AC Stick Welder, 1- Phase, 30 - 235 AC
The Thunderbolt XL 225 AC is an economical AC Stick welding power source with precise, dependable control to get the exact heat you need - always. Exclusive patented Accu-Set amperage indicator provides accurate heat control with infinite amperage control. Unit allows higher duty cycle when amperage decreases, unlike some competitive products in market. Infinite current control allows precise weld output adjustment; get the exact heat you need to produce a better weld. Output selector switch allows you to quickly select low or high range without adjusting the output leads. Forced-draft cooling fan ensures a cooler running product, extending the life of the power source. Thunderbolt XL 225 AC certified by Canadian Standards to both the Canadian and U.S. Standards.

Features:
# Accu-Set� Amperage Indicator - A Miller Exclusive design for accurately controlling amperage or heat output. As you turn the Accu-Set� control, the indicator clearly shows the amperage setting.
# Infinite Current Control - The precise control of the Thunderbolt� XL allows the operator to adjust output by as little as 1-amp increments. Users can always get the exact heat they need, unlike the step control design on competitive products.
# High 100% Duty Cycle Rating - 100 amps AC/65 amps DC
# High DC Weld Output - Up to 150 Amps
# Output Selector Switch - Allows you to quickly select AC/ DCEP or DCEN without adjusting the output leads.
# Fully Varnished Magnetic Coils - One reason the Thunderbolt� XL is so reliable is the varnish that protects and lengthens the life of the coils inside.
# Forced-Draft Cooling Fan - Provides a cooler running product, extending the life of the power source.
# Replaceable weld cables - Removable cables let you lengthen or replace cables easily in the future.

Includes:
# Power Source
# 15 ft. No. 4 electrode cable with heavy-duty electrode holder.
# 10 ft. work cable with clamp
# 6 ft. power cord with plug

Craftsman 10" radial arm saw (Franklin) $275

2008-09-04T10:24:26-04:00

Craftsman 10" radial arm saw and 2 drawer stand

Circa 1980, but very lightly used over the years.
Excellent condition with no known problems.

Accessories included:
planer
dado blade
radial-saw clamp
how-to book
drill chuck
template guide bushings
5 blades (some used)

10" QEP wet saw blade (foxboro) $40

2008-09-04T09:36:36-04:00

brand new never opened 10" wet saw blade. Cost new$46-I have five(5) for sale. The first $50 cash takes them all!!!!. Awsome deal for anyone in the buissness

4"belt/6" disc benchtop sander- new in box (foxboro) $75

2008-09-04T09:36:00-04:00

brand new still in the box. Firestorm 4/6 benchtop sander. an must have item for any woodworker.This retails for $129-so for $75, your getting a great deal.Wont last at this price.

Tool Box from Kobalt new in box 7 drawers (foxboro) $125

2008-09-04T09:19:47-04:00

Brand new still in package, black kobalt tool box. I purchased two of these as gifts and the career path changed in mid stream(my loss is your gain) They cost me $224 new-so I am willing to take $125 for each one. If you want both, you can have them for $200.They have 7 drawers each size is as follows
26.1x12.1x19.8
they have a lifetime warranty.

Industrial Welding Table (Waltham) $1000

2008-09-04T09:09:24-04:00

5 x 10 Welding Table - super strong & heavy!!

Double thick top. 1" solid steel top plate with a .5" steel bottom plate for a total thickness of 1.5" inches. Steel C-Channel supports underneath top.

I purchased this table a few weeks ago for $1,800, but it is too heavy for my use. They told me it weighed 1500 lbs., but when the shipping company picked it up, it weighed in at 5500 lbs! I need a table I can move around and this ain't it!

It's probably worth more than $1,000 in scrap alone. Buyer beware - If you buy it, make sure you have the equipment to move it.

Thanks, Mike

Vintage "Craftsman" 10" table saw with cast irong table and wings (Needham) $40

2008-09-04T07:13:21-04:00

10" �Craftsman� vintage table saw by �Sears- Roebuck Co.�. Direct drive, left tilt, 2 HP, front panel safety switch. No rip fence. 120V wiring, but can be re-wired for 240V. Comes with the stand. Model # 113.226880. Sears still has all parts for this one. Cast iron table and WINGS!

8 Foot Aluminum Step Ladder $45

2008-09-03T22:28:32-04:00

Aluminum 8 foot Step Ladder in Excellent Shape like New. Call 413 245 1038

Electric Arc Welder (Brimfield) $150

2008-09-03T22:15:05-04:00

A Lincoln AC 225 Amp. Stick Welder. Works Great. Runs on 220 Phone 413 245 1038 with any Questions.

Bostitch model LHF97125 floor stapler (Framingham, Ma.) $170

2008-09-03T21:59:11-04:00

Bostitch model LHF97125 floor stapler (used one time for three small rooms). Can be used for solid hardwood like Bruce 5/16 or laminate. I bought this because the ones that Home Depot rents (same model) were worn out and jamming. This worked great and never jammed. I no longer need it as my job is finished. I bought it new for $271.75 on April 10, 2008. Great deal..works perfect and comes with original box and all paperwork. Convertible tool-free adjustable foot adapts to 1/4"- 7/16" flooring
Factory set for installation of Bruce Natural Reflections 5/16" flooring.
Lightweight..Oil free..Molded Rubber Comfort Grip...Call 508 650-9700 ask for Alan

Sears Radial Armsaw (Arlington) $130

2008-09-03T21:28:47-04:00

Sears 10 inch Radial Arm saw with Stand.

TOOLDOCK POWER TOOL STAND (LEOMINSTER) $75

2008-09-03T21:26:52-04:00

TOOL DOCK POWER TOOL STAND. PURCHASED FROM SEARS. CAN MOUNT TABLE SAW OR OTHER POWER TOOLS. INSERTS WITH STAND ALLOW YOU TO QUICKLY MOUNT A POWER TOOL
AND THEN REMOVE IT AND PLACE ANOTHER TOOL IN ITS PLACE IN SECONDS. NEVER USED.Please call. DO NOT EMAIL.
$75.00
CALL MARK 978-870-2176

36 Volt Automatic Battery Charger (Orange, Ma) $65

2008-09-03T21:15:18-04:00

Nice, working Automatic, heavy duty 36 Volt APA Battery charger Model 12050, part 395101-weighs about 40 lbs.

120 V/11 Amp in, 36 V DC/20 A out with DC amp gage

KovacsW@yahoo.com or call 978-544-3984. Fopr darn cheap space see www.clearlightcenter.net

NATIONAL BAND SAW (Marlboro, MA) $180

2008-09-03T20:56:23-04:00

National Band Saw Model A for light work, plexaglass, pvc, wood, etc.
Table 42" height
Size 6' high x 6' long
Motor not included, 115 volts $180 or BO

Call Fred for Details after 5:00pm at 508-259-7719

1985 Ariens 5hp snowblower (Bedford) $225

2008-09-03T20:25:11-04:00

I am selling a 5hp Ariens snowblower in good condition.

It's been regularly maintained by a lawn and garden shop and stored indoors. It has a working electric starter.

Please email for more information or to come have a look.

Makita Diamond Blades (Framingham) $35

2008-09-03T19:19:31-04:00

Continuous Rim.

7" - $35 each.

4 1/8" - $20 each.

The 7" retail for $90-100. The 4 1/8" retail for around $50. These are not economy blades or cheapos!

Call 617-980-1011. Thanks.

ramteq pressure washers (billerica)

2008-09-03T18:21:42-04:00

Ramteq hot water 110v 1.500 psi excellent cond. commercial 978-857-0169 only used as demo and retails for 3000 also 2-230v 3ph high press washers 2000 psi 4gpm. negotiable...

Plate Compactor (Wacker 1550AW) (Marlborough) $2500

2008-09-03T18:08:29-04:00

VERY slightly used Wacker 1550AW plate compactor. Honda 5.5 HP engine. Only about 30 hours of light use. This model has the water feature built in.

This is one sweet machine in perfect condition!

Some of the Technical Features:
Wacker WP 1550W Vibratory Plate

* Water tank included.
* Premium plates features a tough, wear resistant, ductile iron base plate offering high strength and shock resistance.
* Patented computer designed base plate has a tapered bottom and edges for high speed and excellent maneuverability.
* Designed for the compaction of granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction next to structures, curbs and abutments.

Features

* Lightweight, high strength aluminum components including the engine console and belt guard have been combined for reduced weight and easy machine handling.
* Straight, center-mounted guide handle offers superior maneuverability and can be lowered within inches of the surface to operate plate under obstacles and form work.
* High inertia clutch with adjustable shims ensures smoother operation, longer belt life, and simplified belt adjustment.
* Many lifting points and front lift cage offer easier loading and unloading for operator convenience.

Technical Data WP 1550W
Description Metric Inch
Length x width x height (handle in working position) 875 x 400 x 965 mm 34.5 x 15.5 x 38 in
Lowest working height 510 mm 20 in
Size of base plate (L x W) 585 x 400 mm 23 x 15.5 in
Operating weight 86 kg 190 lb
Water tank capacity 10.5 l 11 US qt
Compacted area 612 m2/h 6,590 ft2/h
Forward speed up to 30 m/min up to 100 ft/min
Gradeability 30 % 30 %
Vibration frequency 100 Hz 6,000 vpm
Max. centrifugal force 15 kN 3,375 lb
Engine Type air-cooled, 4 cycle single cylinder, gasoline engine Honda
Displacement 163 cm3 9.9 in3
Max. power output 4,1 kW 5.5 hp
at 3.600 1/min 3,600 rpm
Rated power output 3.7 kW 5.0 hp
at 3.600 1/min 3,600 rpm
Fuel tank capacity 3.7 l 3.9 US qt
Fuel consumption 1.8 l/h 1.9 US qt/h
Power Train Power transmission from engine via centrifugal clutch and V-belt onto exciter which transmits centrifugal force onto base plate.

Asking $2,500

If you are going to try and negotiate don't be stupid and offer something ridiculous! I'd rather eat at the soup kitchen than give away this asset!

Call 508-250-7573 or 508-460-3490

Crafstman 8' Cross Slide Rotary Table (Lexington) $275

2008-09-03T17:51:47-04:00

Excellent condition.

Milwaukee SDS-Max Hammer Drill (Rare) (Marlborough) $700

2008-09-03T17:51:18-04:00

This is pretty new Milwaukee SDS-Max Hammer Drill (model #5342-20). It looks like a Milwaukee Drill on an overdose of Steroids! Uses 1-1/2" SDS-Max bits.
This beast weighs about 25 pounds. It will handle nearly all kinds of drilling and demolition jobs you throw at it. Perfect for driving ground rod or driving rebar to anchor retaining walls or other landscaping applications(using the special bit for that job).

Has metal case, removable handle, and operators manual.

This is a wonderful machine! I hate to part with it! I simply need the money for expenses. This costs about $1000 new. Only a little over a year old with less than 50 hours of use. Has cosmetic/surface wear on tool only.

The asking price of $700 is a steal. I will do a little negotiating. I will not take a beating on it though. Be reasonable with your offers!

Call 508-250-7573

Log Skidding Tong w/Ring NEW (Marlborough) $95

2008-09-03T17:48:48-04:00

This is a new Skidding Tong w/Ring (mostly is used for dragging logs). Can be used to grab and pull stumps out of the ground. This is made by Peavey Manufacturing Co of Eddington, ME. (Item Number: R-007-025-0687) Specs: 1" x 25" Tong w/ Ring to attach chain.

Chain in Picture is not included.

Retails for $106.94. Asking $95 or REASONABLE offer.

Call 508-250-7573

32 pcs of Snap-on Tools (Framingham) $375

2008-09-03T17:14:45-04:00

Excellent opportunity for Auto Mechanic setting up shop: 32 pieces -- Sockets, Combo Wrenches & Misc. A value at less than 1/2 of Mfg List prices. (Local, cash sale only).

Porter Cable 7518/7519 Router Base - New (Marlborough) $65

2008-09-03T15:44:34-04:00

Porter Cable 7518/7519 Router Base Assembly. New, never used. Base includes Clamping Assembly and Depth Adjusting Ring Assembly. Perfect if you need an extra base for a router table application. $65.00

Call Tom at 508 480-9762 or tomfama@comcast.net

Eubanks 9800 automatic wire stripper (Woburn) $1600

2008-09-03T13:33:14-04:00

Eubanks model 9800 with model 6415 wire demand prefeeder. Fully operational with some spare dies.

781-938-6201 x117

New Delta Tenoning Jig (Framingham) $100

2008-09-03T13:30:02-04:00

Delta Tenoning Jig 34-183.
Never out of box.
Must sell for rent - so much for dreams of wood shop.
Cash only.

$100 or best offer.

Crafstman Radial Arm Saw (Belmont) $99

2008-09-03T11:31:11-04:00

Older model but good quality craftsman 10" radial arm saw, model# 113.197751. It is in very good working condition

Mitutoyo PJ-300 Optical Comparator $700 (Woburn) $700

2008-09-03T11:01:49-04:00

In good condition. 12 In Dia screen. Mititoyo digital readouts. Approx 2.5IN X axis travel and 2.3IN Y axis travel. 10X and 20 X lenses.

781-938-6201 x117

Delta Bench Band Saw 10 " # 28-160 (Stow, Ma) $50

2008-09-03T09:45:57-04:00

Delta 10" Bench band Saw # 28-160.
Works very well. $ 50.00.
Stow is off Rt 495 near Rt. 2.

Portable Mitre Saw Table by TracRac - Chop Saw - Miter Saw (Wayland, MA) $100

2008-09-03T08:40:20-04:00

TracRac TracMaster 200 portable mitre saw workstation table. Tubular aluminum legs establish wide, stable base and fold-up flat for easy portability. Outfeed extension works well with good clamp. Comes with attached wheel kit. Very good condition.

$100.00 or best offer!

Used Briggs and Stratton Generator: (Franklin) $400

2008-09-03T08:29:33-04:00

Used Briggs and Stratton Generator:
Generator is in great shape, always kept inside shed. Original owner, never had an issue, it ran my camp in Maine. Reason for selling is I upgraded to a Honda 6500 ultra quite. You won't be disappointed with this generator. Real easy to start. I always serviced the generator after first 20 hours then every 60 hours.

Generator Details:

Approximate Hours: 250hrs
Product Weight: 169 lbs.
Model Number: 030426
Rated Watts: 5550
Surge Watts: 8550
Voltage: 120/240
Frequency (HZ): 60
Engine: 10 HP Briggs & Stratton Intek OHV
Fuel Tank Capacity: 5
Run Time (50% Load): 10 Hours
Low Oil Protection: Yes
Noise Level (dB): 76
Dimensions (Inches): 25.6" x 22.9" x 22.6"
Manual Can be found:
http://www.briggsandstratton.com/maint_repair/manual_and_more/docsearch.aspx?modelNumber=030426&menu=nav3&subMenu=3&manuType=Illustrated%20Parts%20Lists

Price: $400.00 firm
Contact: b_f_mcevoy@hotmail.com

12 ton hydraulic shop press (Natick) $100

2008-09-03T07:38:45-04:00

Brand new heavy duty all steel shop press that doesn t take up the entire shop! *Irreplaceable tool for applying controlled massive force evenly *Hundreds of practical applications pressing bending axle bushing & bearing installation removal.

Air Compressor by Campbell Hausfeld 60 gallon 6.5HP (Ashland) $325

2008-09-03T07:35:10-04:00

240 Volt/15 amp 60 gallon 125 psi 6.5 HP motor. This compressor puts out alot of air. It will put out 11.8 SCFM @ 40 PSI, 10.3 SCFM @ 90 PSI Very good condition. Can be seen running.

TIG WELDER (STOW) $900

2008-09-03T07:21:28-04:00

LIKE NEW TIG WELDER. AIRCO. MODEL 251. COMES WITH FOOT PETAL, STINGER , BOTTLE $900

LITTLE GAINT STEP LADDER (STOW) $200

2008-09-03T07:19:05-04:00

LITTLE GAINT STEP LADDER MODEL M22 LIST PRICE IS $400. MY PRICE $200. BRAND NEW NEVER USED.

water hose reel (framingham) $40

2008-09-02T22:06:53-04:00

This new in the box water hose reel is a left over sales sample that has a wholesale cost of over $75. It is about 50' long. I only have one left so its first come first served. Call me to arrange a pick up at 508-259-6314.

Thanks!

All Steel convertable Hand Truck (Framingham) $40

2008-09-02T21:32:09-04:00

All Steel Convertable Hand Truck. Use as 2 wheeler or easily converts to a 4 wheel dolly for heavy items up to 350 Lbs. GREAT CONDITION.
Call Sal 508-361-6060

Woodworking Lathe (Lexington, MA) $500

2008-09-02T21:16:19-04:00

Cast iron, unknown make. Capacity: 12� over Gap, 10� over bed, 36� long. Old style with motor underneath, nicely restored by previous owner. Head includes index plate and outboard turning potential.
Includes long tool rest and center support for spindle work, misc. face plates, and stand.

Delta Dust Collector (Weston, MA) $125

2008-09-02T21:11:02-04:00

For Sale one brand new assembled Delta AP400 dust collector for $125. Unused and fully assembled. On sale at Amazon and Rockler for $150 excluding shipping ($50) and sales tax if you buy at Rockler in Cambridge.

Amazon.com Review
This is the perfect dust collection system for the home woodworker. It packs a powerful 1-horsepower motor and moves a maximum of 650 cubic feet of air every minute. Top and bottom collection bags mean you score a hefty 2.6 cubic feet of chip/dust capacity. When we ran this system, we were impressed by how quiet it is--a great advantage for the home woodworker. The 4-inch hose fits standard dust and chip chutes on tools like your jointer, table saw, and planer--the big names in sawdust manufacturing! The AP400 is a great choice for the average home woodworking shop because it's mounted on such a small footprint--just 14 inches wide and 27 inches long--and it sits on four easy-glide wheels to move the system from one tool to another or into the corner for storage. Great power, great price. --Kris Jensen-Van Heste

Product Description
The DELTA AP400 includes 1HP, 12/6 amp., 60 hz, 3450 RPM, 120/240V, 1 Phase motor, advanced blower design, (2) 30 micron collection bags, 4" x 5-ft. collection hose, base with four swivel caster assemblies, cord/plug and instruction manual.

Motor: 1 HP, 12/6 amp, 120/240V (wired 120V), 1 Phase motor, 60 hz, 3450 RPM.
Max. CFM: 650.
Max. Static Pressure: 8.5 in water.
Filter Bag Area: 20 square feet.
Standard Bag Filtration: 30 Micron.
Chip Bag Area: 2.6 cubic feet.
Length: 27" (686 mm).
Width: 14" (356 mm).
Height: 57" (1,448 mm).
Weight: 90 lbs (41 kg).
Warranty: 2 Years.

http://www.amazon.com/Delta-AP400-Shopmaster-Horsepower-Collector/dp/B00006K005

Hobart Gas powered stick welder $500 or BO (Arlington) $500

2008-09-02T21:09:51-04:00

500 AMP generator welder, probably 50 years old or so. Ran a few years ago and been sitting indoors since. Has 4 cyl Jeep engine. Comes with leads and is on frame and casters. $500 or best offer.

Six Inch Jointer (Medfield, MA) $235

2008-09-02T20:53:31-04:00

Six Inch Grizzly Jointer. Model G1182. Has a 47 inch bed; one horsepower motor, weighs 240 pounds. Single phase, 110V power. Three cutting knives.Includes a mobile stand, owners manual, maintenance instructions and parts list. The machine is in very good condition

Metal wheel barrow, good condition (Winchester, MA) $20

2008-09-02T19:14:24-04:00

Metal wheel barrow in good working condition. Great for construction or yard work. Moving sale

New Hydrapower Brake & Shear $76500

2008-09-02T18:10:51-04:00

NEW STOCK MACHINES: IN STOCK CINCINNATI, OHIO

E-13514 PRESS BRAKE 14� x 135 TONS CNC 2 AXIS, 2D graphics
WITH CNC hydraulic crowning, Euro Quick Release tool
clamps $46,500.00

SH-2010 SHEAR 10� x 1/4" - 1 AVAILABLE $30,000.00!

1999 Cincinnati Arrow 1000 $22800

2008-09-02T18:10:16-04:00

1999 Cincinnati Arrow 1000 40" x 20" w/ Acramatic 2100 Control
Age: 1998 / Installed New 1999

Included with this machine is all the tooling and manuals.
There are approximately 30 tool holders and the tool cabinet is included.
There are also (2) Heavy Duty Vises and about 40 misc. size collets.
The Vises are fixed to the table, we have inserted a wooden block in then and run the head down to the block so as to secure the table for shipping.
The original hand tools are also included.
This machine has been well maintained and serviced and has been used to repair machinery and aluminum dies for a large company.
Reason for sale - Facility Closing, hence all tooling and cutters will be included.
This machine was under power until last week. It runs well and sounds good in all axes.

This Machine can circular interpolate holding within 2 tenths.

Specification Description
Control Acramatic 2100

Table 44" x 22"
Maximum Weight on Table 1540 lbs
TRAVELS:
X-Axis 40"
Y-Axis 20"
Z-Axis 22"
Taper #40
Tool Changer 21 position
Spindle Speeds 6,000 RPM
Spindle Motor 15 HP
Rapids 787 IPM

Equipped With:
* Rigid Tap
* Acramatic 2100 Control
* RS232 Port
* Remote Manual Pulse Generator
* Coolant System
* Work Light
* Misc. Tool Holders
* All Available Manuals

THIS MACHINE IS IN VERY GOOD CONDITION AND CAN BE DELIVERED ANYWHERE IN MASS. FOR $22,800.00!

PHOTOS ARE AVAILABLE.

1966 BLISS, Flywheel Type, O.B.I. Power Press $10000

2008-09-02T18:08:57-04:00

Model C-60 BLISS, Flywheel Type, O.B.I. Power Press
New 1966.

Capacity 60 Ton
Air Clutch and Brake with Selector Controls
Stroke 4"
Shut Height Over Bed (SDAU) 14"
Slide Adjustment 3"
Bed Area 32" L-R x 21" F-B
Slide Area 17" L-R x 12" F-B
Depth of Throat 11"
Opening Through Back 15"
Speed 100 SPM
Arranged for Knockout

EQUIPPED WITH:
Dynamic Press Driven Slide Feed, 6" Wide
Wintriss Controls
Bolster Plate, 3" Thick
Bijur Automatic Lubrication System
Electrical Controls
Dual Palm Button Operation
Flywheel Guard
5 H.P. Main Drive Motor

Weight, Approx. 11,000 Lbs.
Dimensions, Approx. 60" L-R x 72" F-B x 118" H

PRICE: $10,000.00

1994 BLISS, Flywheel Type, O.B.I. Power Punch Press $24500

2008-09-02T18:08:36-04:00

Model C-60 BLISS, Flywheel Type, O.B.I. Power Punch Press
New 1994

Capacity: 60 Ton
Air Clutch and Brake With Selector Controls
Stroke: 4"
Shut Height Over Bed (SDAU): 15-1/4"
Slide Adjustment: 3"
Bed Area: 32" L-R x 21" F-B
Flanged Slide Area: 21" L-R x 16" F-B
Depth of Throat: 11"
Opening Through Back: 15"
Speed: 70 to 160 SPM

EQUIPPED WITH:
Bolster Plate: 3" Thick
Automatic Lubrication System
Electrical Controls
Dual Palm Button Operation
Flywheel Guard

Weight, approx.: 11,000 Lbs.
Dimensions, approx.: 60" L-R x 72" F-B x 118" H

PRICE: $24,500.00

1972 BLISS O.B.I. Flywheel Press $12500

2008-09-02T18:08:05-04:00

Model C-60 BLISS O.B.I. Flywheel Press
New 1972

Capacity: 60 Ton
Air Clutch and Brake with Selector Controls
Stroke: 4"
Shut Height Over Bed (SDAU): 14-1/4"
Slide Adjustment: 3"
Bed Area: 32" L-R x 21" F-B
Slide Area: 17" L-R x 12" F-B
Depth of Throat: 11"
Opening Through Back: 15"
Speed: 100 SPM

EQUIPPED WITH:
Remote "T" Stand Operation
Bolster Plate, 3" Thick
Bijur Automatic Lubrication System
Electrical Controls
Dual Palm Button Operation
Flywheel Guard
5 H.P. Main Drive Motor

Weight, approx.: 11,000 Lbs.,
Dimensions, approx.: 60" L-R x 72" F-B x 118" H.

PRICE: $12,500.00

Pickup truck bed extender (Sudbury) $50

2008-09-02T17:56:58-04:00

I have a pickup bed extender that is practically new. Silver and black, I have it installed on my 2004 Ford F-150 and I never use it.

call 617-435-8574

Pickup Truck cargo net (Sudbury) $20

2008-09-02T17:56:36-04:00

I have a 78" x 55" truck cargo net (adjustable) that covers over any cargo that you may have in the bed of your truck.

It's a really nice tool, but one that I don't use. It's brand new, in the box and never used.

I also have a truck bed ramp kit that is new in the box ($10) that I'm also selling.

Please call 617-435-8574

Craftsman 155 piece Ratchet Set (Sudbury) $100

2008-09-02T17:56:25-04:00

I have a brand new Craftsman Ratchet Set (155 piece) that I don't need as I have 3 other sets.

Please call 617-435-8574

Dewalt 10" mitre saw (Sudbury) $90

2008-09-02T17:56:13-04:00

I have a brand new Dewalt mitre saw that I bought a year ago while another saw of mine was on another job site. I've used this saw less than 5 times and for very small jobs. In perfect condition and looks brand new!

I don't need this saw and would like to clear it out of my tool collection.

Please call 617-435-8574

Husky Tile Saw (Sudbury) $75

2008-09-02T17:56:01-04:00

I have a very nice, practically new tile saw that bevels and has sliding base.

This is the top of the line Husky tile saw and I don't recall how much I paid for it. I don't need it and would like to simply get it out of the basement.

Please call 617-435-8574

Reddy Heater (Wayland) $150

2008-09-02T17:55:51-04:00

150,000 BTU
Kerosene / Diesel Forced Air Heater
Heats 3,500 square feet
13.5 gallons
12 hour run time
Built in Thermostat w/ LED Displays
Ignition
15% quieter than similar heaters

FOR SALE!! (Franklin) $30

2008-09-02T16:33:30-04:00

Electric snow shovel in good condition

Finishing Sander (Framingham) $25

2008-09-02T15:03:31-04:00

Double Insulating Finishing Sander. Manufactured by Porter-Cable. Model #340. Instruction Manual included. (English/Spanish/French)

Aluminum Scaffolding planks (Worcester) $75

2008-09-02T14:06:49-04:00

Lynn Ladder & Scaffolding Aluminum deck planks.
Condition is new, never used.
AD-7 Duty: 50# sq. ft. 19" wide 7 foot.
AD-8 Duty: 50# sq. ft. 19" wide 8 foot.
List price for these are $175 & $198 each from Lynn Ladder,
A bargin at $75 each must pick-up.

Palm Nailer by Bostitch (Metro West) $45

2008-09-02T13:59:50-04:00

Bostitch palm nailer, model PN100. Comes complete with manual original box. Bought two for a large job only used one so this one is un-used.

Wet/Dry Vac, Jigsaw, Small Cordless Drill (Lincoln)

2008-09-02T12:31:00-04:00

Genie SV 200Q, 2hp, 5-gallon shop vacuum with permanent filter including 6 ft 1-1/4� hose, a 1 ft wand, and several cleaning tools. Little used. Very clean. (New 2 hp 5-gallon shop vacs sell for $60 on Amazon.) $35.

16 foot 1-1/4� extension hose for the Genie or similar wet/dry vacs. $10.

Black & Decker JS 200 variable speed jigsaw (saber saw) used only twice; in pristine condition. Case included. (New ones sell for $60 on Amazon.) $40.

SKIL 2273 Drive-R-Drill. 3/8� keyless chuck, 7.2v, 2-speed cordless (300/600 rpm) drill with reversible chuck, in very good condition. Includes case, charger, and two sets of NiCad flexi-change batteries that need replacement. $10.